I went to the servicing menu and in the IOT output menu, the motors don't start, only the fan works, which is strange because the exit rollers should work, at least. I checked that the jam sensor is okay, the 077901 returns indeed if I trigger it on purpose. No part moves on the paper feed side.įiddling around, I noticed that the black part supposed to lift the paper to feed it wasn't moving so well, so I took the printer apart, I checked that everything was visually ok inside, and I cleaned the sliders of that feeder, but the problem remains. ![]() ![]() When I request a print, the printer prepares it, runs the exit rollers, then does a few clunks, and gives the error. settings report straight from the printer). Now the printer boots fine, I can access the menus, but I have another paper error when I try to print anything (e.g. I tried lots of things, a firmware reset eventually fixed it. I opened the back, and the spring of the jam sensor (black moving arm on the right side) was off, so I put it back on. I got this used laser printer with a paper jam error 077 901.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |